Analysis of surface wave behavior in corrugated piezomagnetic layer resting on inhomogeneous half-space

This paper deals with propagation of Love type waves in a Piezomagnetic layer with corrugated boundaries overlying an inhomogeneous half-space. Inhomogeneity of elastic half-space is caused due to exponential variations in elastic parameters. Dispersion relations are obtained for magnetically open and short cases. Prominent effects of inhomogeneity, layer's width and corrugation on the phase velocity of considered wave are illustrated through graphs. Some particular cases are derived and exhibited through graphs. Also the influence of undulation parameter, elastic parameter, and piezomagnetic coefficient on phase velocity of considered wave has been marked separately. The present study finds its applications in designing and optimization of Love wave sensors and Seismic Acoustic Wave (SAW) devices. Findings may also be used for analytical study of wave propagation in piezomagnetic coupled structures.     

爆破载荷下隧道围岩破坏裂隙范围研究

为确定爆破载荷作用下岩体的裂隙范围，应用摩尔-库伦强度准则确定岩石在冲击波作用下的粉碎区；在考虑粉碎区范围、应力波衰减指数改变和岩石三向受力状态的情况下,用Mises强度准则计算裂隙区范围；在不考虑爆生气体在应力波形成的裂隙区损失的前提下，用岩石的断裂韧性来计算爆生气体充满粉碎区后岩石裂隙的二次扩展范围。通过理论计算与现场声波实测值对比，理论计算值比实测值小8.45%。分析表明，该裂隙范围计算方法合理，并可以对类似工况的裂隙范围进行估算。     

Scattering of guided shear waves in plates with discontinuities

This paper investigates the interaction of the SH0 mode with discontinuities in plate waveguides. The scattered fields are evaluated using a novel method that exploits the principle of reciprocity in elastodynamics. The results obtained compare to those provided by a finite element model. Very good agreement between the analytical and numerical models proves the effectiveness of the proposed approach, enabling us to clearly elucidate the role of the different size and shape parameters involved. The discontinuities considered are single and double sharp reductions of plate height of different amounts and lengths, where both symmetric and nonsymmetric one-sided notch cases are treated. Regimes related to low and high values of the product frequency and height of the plate are investigated, showing the dependence of reflection and transmission coefficients on length and height of the discontinuity, as well as the occurrence of mode conversion. The analytical approach proposed leads to a better understanding of the interaction of guided waves with discontinuities, which may stimulate the application of guided waves to defect sizing rather than to simple detection.     

Fatigue crack sizing in steel bridge decks using ultrasonic guided waves

A baseline-free quantitative sizing methodology utilizing ultrasonic guided waves for fatigue cracks under welded stiffeners in steel bridge decks has been developed. An inverse wavefield extrapolation-based formulation for obtaining the crack reflectivity and depth profile has been presented in the kernel of which, the presence of welded orthogonal stiffeners has been accounted for. Having conducted experiments on a test bridge deck subject to fatigue loading, it has been demonstrated that the crack profile can be estimated from the reflection coefficients obtained. In comparison with the reference measurements, the maximum crack depth estimation error turned out to be about 20%.     

Vertical oscillations of the thermocline caused by internal waves modify coldwater pelagic fish distribution: Results from a large stratified lake

Fishes typically occupy a species-specific temperature range, with their occupied depth being related to the lake’s temperature profile. When a fish’s preferred temperature range coincides with the thermocline, the location of their preferred thermal habitat is influenced by the rise and fall of internal waves, leading to possible changes in fish depth. These internal waves are common in large, stratified lakes, yet we do not know how they affect the spatial distribution and behavior of freshwater fishes. We conducted nighttime hydroacoustic surveys in a large, deep embayment of a large thermally stratified lake to observe whether pelagic fish respond to vertical oscillations of the thermocline caused by internal waves. The coldwater pelagic fish in our study (primarily cisco, Coregonus artedi) typically occupied a narrow vertical band approximately 5–8 m thick and temperatures between 10.8 ± 0.8–13.6 ± 1.6 °C (fishes sized 106–500 mm), just below the thermocline (centered around 15–17 °C). Importantly, the upper bound of fish depth varied in response to vertical thermocline movements associated with internal waves, suggesting fish respond to changes in their physical environment on timescales commensurate with basin-scale internal wave periods (hours to days), to remain within their preferred thermal habitat. Dissolved-oxygen levels were typically above avoidance thresholds of these fish, thus not likely exerting a strong influence on fish location. Our findings emphasize the need to account for internal waves when designing hydroacoustic and netting surveys, as thermocline movements can influence where fish are located.     

An overview of the nutritional value of beef and lamb meat from South America

The southern region of South America, a subtropical and temperate zone, is an important region for the production of beef and lamb meat, which is mainly produced in extensive pasture-based systems. Because of its content in highly valuable nutrients such as iron, zinc, selenium, fatty acids, and vitamins, meat is a unique and necessary food for the human diet in order to secure a long and healthy life, without nutritional deficiencies. Beef and lamb production systems based on temperate or tropical grasslands show interesting and, in some cases, a differential content in minerals, fatty acids and vitamins. This review deals with the distinctive aspects of the nutritional quality of beef and lamb meat produced in this region in terms of nutritional composition and the bioavailability of key nutrients related to its contribution for a healthy diet for all ages.     

An immunoassay to assess lamb and kid rennets authenticity

The potential adulteration of kid or lamb rennet with calf rennet is of interest for some Protected Designation of Origin cheeses producers and those looking for a specific cheese typicality. The approach proposed here for the authentication of kid or lamb rennet is based on the immuno-detection of bovine pepsin possibly present in calf rennet in varying quantities. The developed immunoassay (indirect ELISA) used a monoclonal antibody (mAb) raised against bovine pepsin. This mAb was found to be specific as it didn't cross-react with the pepsin of animal species other than bovine (kid, lamb, pig) and with other milk-clotting enzymes (chymosin and microbial enzymes). Adulteration tests were conducted with kid and lamb rennets spiked with a wide range of calf rennet (from 0 to 100% v/v). The presence of bovine pepsin was detected at low levels down to 6 mg/L in kid and lamb rennets. Good linear relationships were obtained between added bovine pepsin concentration and the absorbance values over the range 1.25–120 mg/L. Results showed that indirect ELISA proved to be an interesting tool for testing rennets authenticity targeting bovine pepsin as an indicator of the bovine adulteration of kid and lamb rennets.     

Identification and Avoidance of Systematic Measurement Errors in Lamb Wave Observation With One‐Dimensional Scanning Laser Vibrometry

Abstract: Scanning laser vibrometry is a widely used tool to observe Lamb wave fields for structural health monitoring (SHM) purposes. Lamb waves propagate over long distances in thin‐walled structures and interact with structural inhomogeneities, for example, damages, in spite of wavelengths several times of the damage size. In SHM of sheets and glass‐ or carbon‐fibre‐reinforced plastic plates, this effect is used for determining the position as well as the size of structural faults. With the often employed one‐dimensional vibrometry, a geometrically induced, systematic error occurs when measuring oblique‐angled motion. This error can be, in the specific case of Lamb waves, of a non‐negligible quantity. The nature of this geometrical measurement error in general and concerning Lamb waves in special is discussed analytically for both amplitude and phase data. It is shown that this matter should be taken into account in some applications.     

The spectrum study of blood pressure during the disturbance of organic vascular beds

Abstract

Like electrical circuit components, the vascular beds in organs present impedance to waves in systemic circulation. In this study, the authors design an animal experiment to study the effect of the impedance to the pressure waves. We view the systemic circulation as an electrical circuit network, and interpret the vascular beds in organs as lumped components in the electrical circuit. Nature's designing of the systemic circulation minimizes the pressure wave reflection, and maximizes blood distribution. This is very similar to the concept adopted by electrical engineers in designing electrical circuits.